Indicatori di livello - immagine testata

products search

Enter keyword, product code or part of it.

download catalogue

Request for our catalogue or download the digital format in pdf.


Level Indicators



SLV/SLVT - immagine

Thermoplastic level gauges made from transparent polyamide which provides good mechanical resistance and is impervious to mineral oil, gasoline, lubricants, petroleum, solvents and most chemical agents (please refer to Chemical Resistance Trogamid T above ); avoid contact with alcohol based solutions and antifreeze liquids at high temperatures and hot water over 80°C.
Max working temperature 100°C (test made up to 1 bar = 15 psi ).
These level gauges are used in oil and fuel tanks of many types , due to their ability to remain clear in the majority of conditions; the transparent body of the level gauge retains it’s
transparency under most climatic conditions.

The body of the level gauge is made by ultrasonically welding two halves together to ensure a leak free seal around the body. Inside is fitted a white screen with minimum
and maximum level indication. External seal is guaranteed by o-rings and flat rubber washers on each fixing bolt.

The mounting of the level gauge can be made externally by providing 2 threaded holes M10 or M12 on 76 mm or 127 mm centre distance, tolerance +/- 0.3mm.
Alternatively they can be secured internally through 2 plain holes 10.2 mm or 12.2 mm, tolerance 0 + 0.2 mm using the flanged nuts provided.
Maximum tightening torque suggested 5 Nm.

Model SLVT is equipped with an inside thermometer scaled in degrees Celsius 0-100°C and Fahrenheit 50-200°F 50-200° F (0-80°C / 50-175 F model SLVT/76).

Pressure resistance : based on internal technical seal test made using hydraulic fluid at different temperatures degree has been verified the following data:
20°C- 68F = up to 145 PSI
60°C-140F = up to 116 PSI